eTundra Categories

How to Replace a Vitamix Blade Assembly [Video]

Whether a Vitamix blender is crucial to your business, or if you simply like the ease and efficiency of mixing they provide, you know that keeping sharp blades is key to good operation. If your blades begin to dull, you can simply replace the blade assembly itself, without having to go out and but an entire new container (unless the container is worn out as well!). For this process, you will need a Vitamix Retainer Wrench.

Shop Vitamix Parts

Before taking action from the content or resources published here, we request that you visit and review our terms of use.

Video Transcript:

Hi, I’m Chris Tavano for Tundra Restaurant Supply. In today’s episode I’m going to show you how to change the blade assembly in your Vitamix prep container.

Pretty much what we have here is our retainer nut wrench by Vitamix; unique for its blade assembly replacements. As well as, we have a 64 ounce Vita prep container here. First you’re going to take off the lid as that’s not needed. Turn your container upside down. The nice thing is this wrench, that hole is going to fit right over your drive socket. It only fits one way and from there lefty loosey.

You want to be careful with those blades because they might be sharp still. I’m using a rag to grab a hold of that blade. That nut comes off and your blade assembly should just pop right out. Go ahead and take that old one. We can discard that. Now you have your empty container and your nut.

Now we’re going to get our new blade assembly. You’ll notice on the blade assembly there are two flat sides. That’s going to correspond with the two flat sides on the bottom of your container. Again, be careful just using a rag here. You could also use a cut glove, the Chain Mail Steel Mesh. Pretty much that way you don’t create any nicks on your fingers as you’re trying to replace this. In there it should just snap in place. Get our retaining nut. You can go ahead and screw that on finger tight for the time being.

Then get our retainer nut wrench by Vitamix again. We’ll tighten this piece back into place. There you have it, replacing the blade assembly on your Vitamix container.

I’m Chris Tavano from Tundra Restaurant Supply. That’s how you change your Vitamix blade assembly. Join us again next time.

, ,

No comments yet.

Leave a Reply