eTundra Categories

Replace the Impeller in a Crathco Beverage Dispenser [Video]

Crathco Beverage Dispensers are pretty basic machines, and the only moving part inside the bowl is the impeller. The impeller spins to create the flow and spray of liquid – and if your machine is starting to make a strange noise, or isn’t functioning as well as it used to, chances are the impeller needs to be replaced. Luckily, it’s a quick and easy repair! Learn how in this video lesson:


Shop Crathco

Before taking action from the content or resources published here, we request that you visit and review our terms of use.

 

Transcript:

Hi, I’m Chris Tavano for Tundra Restaurant Supply.  In this follow-up video I’m going to show you how to disassemble and replace the Impeller for your Crathco Beverage Dispenser.

So on the Crathco Beverage Dispenser, your real only moving part as far as mechanics inside the unit is this impeller.  So often times if you hear a funny noise from your beverage dispenser or you notice that the juice isn’t flowing consistently or the way that it used to when it was brand new, odds are you need to replace your impeller.  Here’s how.

First we’re going to take off the lid, take out your spray tube, remove your valve and handle.  You’re going to want to remove the lockdown washer, you’re going to want to remove the pump cover and then if you want you can remove the bowl depending on how tall you are or how easy your reach is.  Now we’ve exposed the impeller and this is all we’re trying to replace.  This is very easy.  It’s magnetic and it just slides right off.  Get your new impeller.  Again, it’s magnetic, just slides right back on and that’s how you replace your impeller for  a Crathco Beverage Dispenser.

I’m Chris Tavano for Tundra Restaurant Supply.  Be sure to comment below, or if you have any questions, contact our sales floor, and please subscribe to our weekly videos.

, ,

No comments yet.

Leave a Reply